Model	HB-C1	HB-C2	HB-C3
（mm）Dimension	2560×1460×1270	2560×2160×1270	2560×2560×1270
Laminating area(mm)	2200×1100	2200×1800	2200×2200
Weight of equipment(T)	3.2	4.2	4.8
（mm） Laminating height	25	25	25
Power	（Three phase, four wire）
（MPa） Compressed air pressure needed	0.6-1.0	0.6-1.0	0.6-1.0
（L/h） Cooling water flow needed	480	480	480
（KW） Total power of equipment	27	33	33

Technical Specification

Operation controlling mode: manual/semi-automatic
1.Heating mode: oil-heating, base work & modulation work double heating function
2.Temperature control: PID intelligent temperature control
3.Temperature uniformity in working area: ≤±1.5℃
4.Temperature control accuracy: ≤±1℃
5.Temperature control range: 30℃-180℃
6.Pumping speed: 30L/s、70 L/s
7.Laminating time: 6-8mins (excluding curing time)
8.Operating vacuum degree: 200-20Pa
9.Exhausting time: 4-6mins

Functions

1.Safety assurance:
Setting hydraulic pressure safety lock. When the power is down suddenly or the cover is opened in place, the top cover will automatically lock in the current position and not fall, which ensure the safety of operator.
2.Setting emergency button switches. Pressing it when the accident happens. The laminator will cut off the main power supply and top cover will remain in situ. Guaranteeing that the accident has been solved and treated.
3.Alarm system:totally eight sets of warning device to ensure the accuracy and normal of working state and increase finished product yield.
4.Setting emergency opening device.

5.Equipment control circuit uses low-voltage control which can provide convenience for maintenance personnel and increase the security factor.

Structure features:

1)Touch screen steering structure. Leading technology, pretty appearance, compact structure, and convenient operation.
2)The seal ring is placed overhead to extend the service life.
3)Power arm balancing and lifting structure makes the opening and closing of upper room more stable and safer.
4)Anti-fold structure of the rubber plate could extend the service life of the rubber plate.
5)Use finishing thick steel plate as heating platform. In the lower part of this platform a full closed oil circulation system is adopted which ensures the uniformity and controllability of temperature when packaging the components.

Application features:
Both one-time laminating and curing and three times laminating and curing are workable. The equipment of module production has high compatibility.
Performance features:
1)Intelligent temperature control system makes the temperature more homogeneous and easier to set and control.
2)Laminating pressure is adjustable and can be   adjusted according to the process, which makes the quality of modules better.
3)It could work continuously in high temperature for 24 hours.
4)The advanced touch screen operating platform makes it more intuitive to operate, makes it respond more quickly, make the performance more stable and the failure rate is further reduced.
5)Applying a fully humanized operating procedure.. In the normal production, operators will only be required to put the modules on the heating platform and press the cover switch. The equipment will automatically laminate, cure and open cover automatically and wait for operator to start the next procedure.